Brightness/Contrast Setup; Recording Setup - Q-See QSNDVR4R User Manual

4 Channel Digital Video Recorder
DISPLAY: If set to OFF, the channel's name will not display on the screen.

11. Brightness/Contrast Setup

When the cursor moves to BRI/CON SETUP in the VIDEO SETUP window, press the ENTER button
and the BRIGHT/CONTRAST SETUP window will appear. This is illustrated below.
BRI: Picture Brightness
CON: Picture Contrast
Press the UP, DOWN, LEFT, and RIGHT arrow buttons in the front panel or remote to move the cursor
around to set BRI and CON for each channel. Press the "+" or "+" buttons to modify the intensity
values.

12. Recording Setup

When the cursor moves to RECORD SET in the main SETUP MODE menu, pressing the ENTER
button will result in the RECORD SETUP window appearing. This is illustrated below. Press the up or
down arrow buttons to move the cursor. Press the "+"or "-" buttons on the remote, or in the front panel,
to change the values.
Note: While the DVR is in recording or playback mode, you cannot access this menu unless you
stop recording or playback first.
18