Pan -Tilt -Zoom (Ptz) Operation - Q-See QSNDVR4R User Manual

Network Viewer software.
To Playback the files, connect the USB Flash to a PC and run the Network Viewer program.
•
On the PC do a scan, click on Local Search and click on Open Folder and select the Flash Drive.
Select the files and click on PLAY in Network Viewer.
15. Pan-Tilt-Zoom (PTZ) Operation (Requires technical expertise for initial setup)
The DVR can control all the "speed dome" cameras that are connected to the DVR.
•
To control the speed domes, ensure that all the lines are properly connected and that the correct
•
protocol, baud rate, and speed domes' address for each speed dome camera has been input.
Refer to Protocol Set in the SYSTEM SETUP section of this manual. For example, if the first
speed dome camera is connected to channel one, you should make sure that the baud rate, the
protocol, and speed dome's address is the same as that of the speed dome camera connected to
the channel. Also refer to the setup and operations manual for the speed dome cameras.
To start controlling the speed dome cameras, press the PTZ button in the front panel or remote.
•
The characters "PTZ CAM 1" will appear on the screen, which means you are now controlling
the speed dome connected to Channel 01. Press the button again to control the speed dome that
connects to Channel 02, the character "PTZ CAM 2" will appear on the screen. The same
operation will access Channels 03 and 04. Press the PTZ button one more time to exit the PTZ
control operations.
During the PTZ control operation, press the UP, DOWN, LEFT and RIGHT buttons in the front
•
panel or remote to move the speed domes. Press the ENTER button to stop.
If you press the Iris button on the remote, "IRIS" will appear on the screen. The Iris is an
•
adjustable opening (aperture), which controls the amount of light coming through the lens (i.e.
the "exposure").Pressing the "+" and "-" buttons will change the Iris. A similar operation will
control the FOCUS, ZOOM and SPEED. Press the ENTER button to stop adjustments for each.
Other DVR functions will not respond until the PTZ Control Operation is cancelled. Press the
•
PTZ button one more time to exit from PTZ Control.
4 Channel Digital Video Recorder
44