Login; Snap Picture; Parameter Settings; Record - Q-See QSD2304L User Manual

4.2.1 Login

The operation of the Network Client is the same as the DVR. Default username is 'Admin' and password '123456'.
STEP1 Click
STEP2 Press "Enter" key to login.
Notice: Click "EXIT" button, to exit the system.

4.2.2 Snap Picture

Snap live picture. Press

4.2.3 Parameter Settings

In the Parameter Settings window you can set how many picture you snap at once. If you select 5, you can snap five
pictures every time when you click "Snap Picture" button.

4.2.4 Record

STEP1 Click "DVR Record" button.
STEP2 Select "Start Record" in drop down list to record.
STEP3 Select "Stop Record" in drop down list to stop recording.

4.2.5 Camera Audio

You can set to open or close the camera's audio option.
STEP1
When you are in live display mode or playback mode, select a channel to display in Large Picture mode.
STEP2 Right-click the picture, and select "Open Audio" to play the camera's audio.
STEP3 Click

4.2.6 DVR Status Panel

Meaning of the colors for indicator lights in the Main Interface are shown below:
1. Grey indicator light: Normal State.
2. Green indicator light: Manual Record State.
3. Yellow indicator light: Motion Detection Record State.
46
QSD2304L DVR User's Manual
button to input username and password in the pop-up box.
to snap the picture.
button to turn the audio up or down.