Grounding Instructions - Precor 9.31 Owner's Manual

Grounding Instructions

The M9.31 Low Impact Treadmill must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric current which
reduces the risk of electrical shock. The treadmill is equipped with a power cord
having an equipment-grounding conductor and a grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances. If you do not follow these Grounding
Instructions , you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to
whether the treadmill is properly grounded. Do not modify the plug provided with the
treadmill—if it doesn't fit the outlet, get a proper outlet installed by a qualified technician.
Correct power outlet for
Diagram 1
U.S. Markets: 15 amp 120-volts.
120-volt grounding plug
120V Units Designated for U.S. Markets
The M9.31 treadmill must be connected to a dedicated, grounded circuit having a
nominal rating of 120-volts. A 20 amp circuit is recommended. The treadmill's
grounding plug looks like the plug illustrated in Diagram 1. The power outlet must have
the same configuration as the plug. No adapter should be used with this product.
ATTENTION: Haute Tension
Débranchez avant de réparer
page 5