Step 2. Make Vcr Connections To Tv - Zenith PV4661LK Operating Manual And Warranty

CONNECTIONS FOR YOUR TV
,STEP 2. MAKE VCR CONNECTIONS TO TV
STEREO VCR
Connections: You must make the following connections to
obtain stereo sound from your TV while playing a stereo
video tape.
It. Connect the VCR RIGHT/LEFT AUDIO OUT-
PUT into the VIDEO 1 IN RIGHT and LEFT audio
jacks on the TV.
2. Connect VCR VIDEO OUTPUT into the VIDEO
1 IN VIDEO jack on TV.
Operation: To use these VCR connections, VIDEO 1 must
be selected from the SOLIRCE MENU. To select this source,
refer to the SOURCE MENU section of this booklet. For im-
proved picture quality, place VCRFFV switch on your VCR in
the VCR position.
STEREO VCR
i i
I
AUDIO
!
vlo{-o R L
©
VIDEO 1 IN
VIDEO
-0
F
0
MONAURAL VCR
Connections:
1. To get monaural sound from both TV speakers, use
a Y-adapter audio cable (customer supplied) to
route VCR AUDIO OUT to the VIDEO 1 IN
RIGHT and LEFT audio jacks on the TV.
2. Connect VCR VIDEO OUTPUT into the VIDEO
1 IN VIDEO jack on TV.
MONAURAL VCR
I VIDE OU TPUTASuD_3-I
=©
VIDEO 1 IN
VIDEO
-Q
R
_-o 1 - 4