Table of Contents
Advertisement
SETUP MENU
CLOCK SET
Purpose
Sets the clock in the TV to the correct time. After the time
is set, the current time will appear on the Channel/Time
dis-
play whenever the TV is turned on, the channel is changed,
or ENTER is pressed.
Power Failure Note: The time will have to be reset if power
to the TV is interrupted.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SI:--I"
CAPTION_;
CH. BACKGROUND
PROJO S_IUP
10:30
To Use CLOCK SET from Remote Control
1.
CLOCK
SET should be selected
if you followed
the
"Basic
Menu
Operation"
given in the "On-Screen
Menu" section.
2.
Use the numbered
butto:as on the remote
control
to
enter
the current
time.
Press ENTER
to start the
clock.
For example,
to set the clock to 10:30, press
1, then
0, then
3, then
0; and then
press
ENTER.
If you
enter an invalid time, such as 14:35 or 2:80, the time
will disappear
and you can enter another
time.
To Use CLOCK SET from Control Panel
1.
Use SELECT
Up/Dow_
to highlight
,CLOCK SET
in the SETUP
MENU.
2.
Use ADJ Left/Right
to ,;et the time, and then press
ENTER
to start the clock.
Selecting Clock Set
CAPTIONS
Purpose
Displays closed captions (CC) or informational
text when
available on the selec_.ed channel.
To Access CAPTIONS Indirectly
1.
CAPTIONS
should be selected
if you followed
the
"Basic
Menu
C peration"
given in the "On-Screen
Menu"
section.
2.
One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1, and TEXT 2.
3.
Press ADJUST
(ADJ)
Left/Right
to select desired
mode of operation.
4.
The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove
the display
immediately.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK SET
-_ CAPTIONS
CH. BACKGROUND
PROJO :SETUP
CAPTION I
Selecting Captions
To Access CAPTIONS
Directly
1.
Press
CC-QUIT
on
th,_ remote
control
to select
CAPTIONS.
One
of the five different
selections
is
shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1,
and TEXT
2.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
status.
3.
The
display
disappear.,,
from
the
screen
automat-
ically in about
10 seconds,
or you may press
ENTER
(ENT)
to remove
the display
immediately.
2_o
8 - 4
Advertisement
Table of Contents
