Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
]Purpose
.Mlows for setting the TV tuner to match your antenna or
cable-TV system.
If you used the AUTO CH. SEARCH
feature, the proper
BAND was set automatically
for your TV. If you did not use
AUTO CH. SEARCH,
or you are having difficulty tuning
channels, the TUNING BAND may have to be set manually
to match your viewing needs.
Before Using TUNING BAND
Connect and turn ON all external equipment,
such as a
cable-TV decoder, VCR, etc. Use CH. AUTO SEARCH,
if not previously used.
NOTE: TUNING
BAND can be used only with ANT/
CABLE 1 or 2 Source selection.
To Use TUNING
BAND
1.
TUNING
BAND
should be selected
if you followed
the "Basic
Menu
Operation"
given
in the "On-
Screen
Menu"
section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
-_ TUNING BAND
AUTO FINE!TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
PROJO SEIUP
CABLE-CATV
2.
Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
tuning band, as shown below:
•
BROADCAST
is used
for standard
over-the-air
broadcasts.
•
Cable - CATV is used for most standard
cable-TV
(CATV) systems.
•
Cable - HRC is used fGr cable-TV syslems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13
UHF
14 to 69*
*
Channels above 69 are not selectable.
CATV, HRC and ICC Bands
1 to 125'*
** Channels above 125 are not selectable.
When Some Channels Are Not (:lear
If some channels are not clear, change the AUTO FINE
TUNE. You may have to try difterent TUNING
BAND and
AUTO FINF TUNE combinations
until you get a clear pic-
ture, channel-to-channel.
Refer to the AUTO FINE TUNE
option for details.
Selecting Tuning Band
AUTO
FINE
TUNE
Purpose
Lets your TV compensate for variations in broadcast
and
cable-TV frequencies.
If you are having difficulty tuning channels, the AUTO
FINE TUNE may haw _. t o be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
Connect and turn ON all external equipment,
such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADDfDEL
OH. LABELS
TUNING BAND
-_ AUTO FINE TUNE
CLOCK SET
CAPTIONS;
CH. BACKGROUND
PROJO SE'IUP
FIXED
Selecting
Auto Fine Tune
NOTE: AUTO FINE TUNIS can only be used with ANT/
CABLE 1 or 2 source selection.
To Use AUTO FINE TUNE
1.
AUTO
FINE TUNE
should
be selected
if you fol-
lowed
the "Basic
Menu
Operation"
given in the
"On-Screen
Menu"
section.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
mode of operation,
as follows.
•
FIXED is used to receive "over-the-air"
TV stations,
and with many cable-TV systems.
•
SEARCH
is used only when the TV faust search to
find the frequency being received, such as when used
with certain VCRs and video game controllers.
When Some Channels Are Not Clear
If some channels are not clear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING BAND settings until you get a consistently
clear picture, channel-to-channel.
Refer to the TUNING
BAND option for details.
2_-o
8 - 3
Advertisement
Table of Contents
