Step 4. Make Stereo Audio; Connection To Audio Amplifier - Zenith SYSTEM 3 Series Operating Manual And Warranty
Mts stereo receiver/monitor with seq audio system, surround sound and closed captions
Hide thumbs
Also See for SYSTEM 3 Series:
- Operating manual & warranty (40 pages) ,
- Operating manual (16 pages) ,
- Operating manual & warranty (38 pages)
Table of Contents
Advertisement
CONNECTIONS
FOR YOUR TV
STEP 3. MAKE STEREO
AUDIO
CONNECTION
TO AUDIO AMPLIFIER
Using an External Amplifier with Speakers While the TV's
Speakers are OFF.
1. Make the connections
to the external
amplifier
as
shown in the diagram below.
2. Place the SPEAKER
EXT/INT
switch on the TV in
the INT position
(TV's
speakers
are ON).
3. Turn the TV ON. Increase
the volume level of the
TV until the sound just starts to distort (sound bad).
4. Place the SPEAKER
EXT/INT
switch on the TV in
the EXT position
(TV's speakers
are OFF).
5. Turn the external
audio amplifier
ON. Adjust the
volume level of the audio amplifier
for the highest
level you will need for your listening
pleasure.
6. Adjust the volume level of the TV for the normal
listening
level as heard through the speakers
of your
audio amplifier.
7. You can now use the VOLUME
(VOL)
control
on
the TV or on the remote
control
to adjust
the
volume of the speakers
of your audio amplifier.
Using an External Amplifier with Speakers While the TV's
Speakers are ON.
1. Make the connections
to the external
amplifier
as
shown in the diagram below.
2. Place the SPEAKER
EXT/INT
switch on the TV in
the INT position
(TV's speakers
are ON).
3. Turn the TV ON. Increase
the volume level of the
TV until the sound just starts to distort (sound bad).
4. Turn the external
audio amplifier
ON. Adjust the
volume level of the audio amplifier
for the highest
level you will need for your listening
pleasure.
5. Adjust the volume
level of the TV for the normal
listening level as heard through the speakers of the TV.
6. You can now use the VOLUME
(VOL)
control on
the TV or on the remote
control
to adjust
the
volume
of both the TV's speakers
and the audio
amplifier's
speakers.
NOTE: If the volume of the internal TV speakers is set too
low, you may hear undesirable noises through the speakers
connected to your audio amplifier.
Panel on Back of
Stereo
Amplifier
I??
A_TENNA/CABLE
1 1
D2
E
O
RIGHT
LEFT
VIDEO
AUDIO
Connection
Center on Back of 1"V
z57_.B
l -- 5
- Quick Links:
- Connections for Your Tv
Hide quick links:
Advertisement
Table of Contents
