Vertical Control Panel - Zenith SYSTEM 3 Series Operating Manual And Warranty

GETTING TO KNOW YOUR TV
VERTICAL CONTROL PANEL
The following description applies to models having a verti-
cal control panel.
Full Size Control Panel
Front Panel Controls
1. Remote Control Detector Window
Point the remote control towards this window to
operate the TV.
2. OFF-ON
Press to turn TV power ON or OFF.
3. CHANNEL (CH) Up/Down
Press to select channels higher or lower than the chan-
nels being viewed. You can add channels to or delete
channels from the scanning sequence stored in
memory. See CH. ADD/DEL option of the "Setup
Menu" section of this operating guide for channel
programming information.
4.VOLUME (VOL) Up/Down
Press to increase or decrease the sound level.
5. MENU
Press once again to see a menu. Press repeatedly to
sequence through the available menus.
6. SELECT (SEL)
Press during on-screen menu operations to select a
menu option.
7. ADJUST (ADJ) Left/Right
Press during on-screen menu operations to see in-
formation/status display for selected option. Press
again to adjust the selected menu option.
8. ENTER (ENT)
Press to see the Channel/Time display, or to remove
any on-screen display.
ZSW-B 4 - 2