Step 8. Make Audio Connection To Stereo Amplifier - Zenith PV4663RK Operation Manual & Warranty

CONNECTIONS FOR YOUR TV
STEP 8. MAKE AUDIO CONNECTION TO STEREO AMPLIFIER
Using an External Amplifier with Speakers While the
TV's Speakers are OFF.
1. Place the SPEAKERS EXT/INT switch on the TV in
the INT position (TV's speakers are ON).
2. Turn the TV ON. Increase the volume level of the TV
until the sound just starts to distort (sound bad).
3. Place the SPEAKERS EXT/INT switch on the TV in
the EXT position (TV's speakers are OFF).
4. Turn the external audio amplifier ON. Adjust the
volume level of the audio amplifier for the highest
level you will need for your listening pleasure.
5. Adjust the volume level of the TV for the normal
listening level as heard through the speakers of your
audio amplifier.
Using an External Amplifier with Speakers While the
TV's Speakers are ON.
1. Place the SPEAKERS EXT/INT switch on the 'IV ill
the INT position (TV's speakers are ON).
2. Turn the TV ON. Increase the volume level of the TV
until the sound just starts to distort (sound bad).
3. Turn the external audio amplifier ON. Adjust the
volume level of the audio amplifier for the highest
level you will need for your listening pleasure.
4. Adjust the volume level of the TV for the normal listening
level as heard through the speakers of the TV.
NOTE: If the volume of the internal TV speakers is set too
low, you may hear undesirable noises through the speakers
connected to your audio amplifier.
_ VARIABLE
AUDIO
OUTPUT
RIGHT LEFT
TO EXTERNAL AMP OR SPKR
;:1: SPEAKERS
INT_ tEXT
LQOPOUT ANT/CABL[2 ANT/CABLE1
TODECOOER
VIDEO1 IN VIDEO2IN
VIDEO FAUDIO_ 'VIDEO [-- AUDIO - i
Q@
__o LP R L _ Q
_--__ [ S-VIDEO1IN
-
/R RiLl /__
LOOPOUT / S-VIDEO R SURROUNDSPKRS
Back of Customer's
Stereo Amplifier
IAux,NPUT Hj
SPKR OUTPUT
R L R
I
To External
Speakers
I -- '[
2738-0