Vcr Operations - Zenith SYSTEM 3 Series Operating Manual And Warranty

REMOTE CONTROL MODEL MBR3430
VCR OPERATIONS
The following functions and operations apply to Zenith
VCR models built after 1988. The remote control supplied
with your VCR may have keys not duplicated on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete details on how to operate your Zenith VCR,
refer to the operating guide supplied with it.
The remote control must be in the VCR mode to operate
your VCR.
MODE
Press repeatedly to select the
VCR mode of operation.
VCR
Lights when VCR mode of operation
is selected.
MENU, SELECT, ADJUST and QUIT /
Used with the on-screen menus and
programming options of the VCR. See
VCR operating guide for details
Numbered Buttons
1
Used to select a TV channel through [
the VCR. Also, used to set the timer in
1
the VCR, and to enter programming
information.
ENTER
Used with the numbered buttons to
select a TV channel through the VCR.
AM/PM
Used to set timer during programming.
SWAP
When PIP is active, press to swap the
main picture with the PIP video frame.
/
RECORD, STOP, PAUSE, SEARCH, "
REW, PLAY and F FWD
Used for tape recording and playback
functions. See the VCR operating guide
for details.
For optimum performance, point the
remote control toward your VCR.
[]
FREEZI
TII,/.ER SD_
RECORD STOP PAUSE SEARCH
REW PLAY F FWD "i'V/VCR
Y
I
Remote Control MBR3430
VCR Operations
OFF/ON
Used to turn VCR ON or OFF.
FLASHBK (Flashback)
Press during VCR playback to view the
channel tuned by the VCR.
CHANNEL Up/Down
Used to select a TV channel by going
Up or Down through channels from the
VCR.
TIMER
Activates TIME RECORD on
some VCRs.
TV/VCR
Used to select the source of the
programs seen on the TV. Switches the
VCR between TV mode and VCR
mode. "IV Mode: channels are selected
through the TV. VCR Mode: channels
or tape operation are selected through
the VCR.
zs77-8 5 -- 3