Clock Set; Captions - Zenith SYSTEM 3 Series Operating Manual And Warranty

Mts stereo receiver/monitor with seq audio system, surround sound and closed captions
Hide thumbs Also See for SYSTEM 3 Series:
Table of Contents

Advertisement

SETUP
MENU
CLOCK SET
Purpose
Sets the clock in the TV to the correct time.
After the time is set, the current time will appear on the
Channel/Time
display whenever the TV is turned on, the
channel is changed, or ENTER
(ENT) is pressed.
Power Failure Note: The time will have to be reset if power
to the TV is interrupted.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
10:30
To Use CLOCK SET from Remote Control
1. CLOCK
SET should
be selected
if you followed
the
"Basic
Menu
Operation"
given in the "On-Screen
Menus"
section.
2. Use the numbered
buttons
on the remote
control
to
enter the current
time. Press ENTER
(ENT)
to start
the clock.
For example, to set the clock to 12:30, press 1, then 2, then
3, then 0; and then press ENTER
(ENT). If you enter an in-
valid time, such as 14:35 or 2:80, the time will disappear
and
you can enter another time.
To Use CLOCK SET from Control Panel
1. CLOCK
SET should be selected
if you followed
the
"Basic
Menu
Operation"
given in the "On-Screen
Menus"
section.
2. Use ADJUST
(ADJ)
Left/Right
to set the time, and
then press ENTER
(ENT)to
start the clock.
Selecting Clock Set
CAPTIONS
Purpose
Displays closed captions (CC) or informational text when
available on the selected channel.
To Access CAPTIONS Indirectly (All Models)
I. CAPTIONS
should
be selected
if you followed
the
"Basic
Menu
Operation"
given in the "On-Screen
Menus"
section.
2. One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1 and TEXT
2.
3. Press ADJUST
(ADJ)
Left/Right
to select
desired
mode of operation.
4. The display
disappears
from
the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove
the display
immediately.
To Access CAPTIONS
Directly (Select Models)
1. Press CAPTIONS
or CC/QUIT
on the remote
con-
trol to select CAPTIONS.
One of five different selec-
tions
is shown:
OFF, CAPTION
1, CAPTION
2,
TEXT
1 and TEXT 2.
2. Press ADJUST
(ADJ)
Left/Right
to select desired
mode of operation.
3. The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove the display immediately.
(continued on next page)
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
CAPTIONS
CH. BACKGROUND
CAPTION
1
Selecting Captions
z577.s
8 -- 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents