Cable-Tv Operations - Zenith SYSTEM 3 Series Operating Manual And Warranty

REMOTE CONTROL MODEL MBR3430
CABLE-TV OPERATIONS
The following functions and operations apply to a Zenith
cable-TV decoder. The remote control supplied with your
cable-TV decoder may have keys not duplicated on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete information on how to operate your cable-TV
decoder, refer to the operating guide provided with it.
The remote control must be in the CABLE mode to
operate your cable-TV decoder. The VOLUME control
will always adjust the TV volume regardless of the selected
operating mode of the remote.
MODE
Press repeatedly to select the
CABLE mode of operation.
CABLE
Lights when CABLE mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Function depends on
cable-TV system.
Numbered Buttons
Used to select channels through
cable-TV decoder
ENTER
Press after a channel number is entered
to change channel instantly.
For optimum performance, point the remote
control toward your cable-TV decoder.
_ -'X orroN
ADJ. _i]
SELECT QUIT
®®®
®®®
®®®
SOURCE
©
FLAN._
N]
CHANNEL
@
VOLUME
®..c )
O(=:D (=:D CZ_
LJT..ARN PIP FREEZE MUTE
_) (:=Z) (=D CZ)
SWAP TIMER SEQ
C::_ CE:) C:ED (:::)
RECORD STOP PAUSE SEARCH
(]_D (_EZ) (]_D (==)
REW PLAY F" FWD TV/VCR
OFF/ON
Used to turn cable-TV decoder
ON or OFF.
SOURCE
Selects "A" or "B" cable channels.
CHANNEL Up/Down
Used to sequence through cable-TV
channels.
VOLUME Up/Down
m Used to adjust the volume level of the TV.
Remote Control MBR3430
Cable-TV Decoder Operations
z57_-B
5 -- 4