Step 2. Make Vcr Connections To Tv; Step 3. Make Audio Connection To Stereo Amplifier - Zenith SENTRY 2 Operation Manual & Warranty
Direct-view color tv mts stereo audio
Hide thumbs
Also See for SENTRY 2:
- Operating manual & warranty (34 pages) ,
- Operating manual & warranty (32 pages) ,
- Operating manual & warranty (31 pages)
Table of Contents
Advertisement
CONNECTIONS
FOR YOUR TV
STEP 2. MAKE VCR CONNECTIONS
TO TV
If you have a stereo VCR, you must make the A/V connec-
tions shown below in order to hear stereo sound while playing
a tape.
To use these VCR connections, you must watch the AUX
channel on the TV. To select the AUX channel, press CHAN-
NEL (CH) Up/Down until you select the next channel after
the highest/lowest channel.
RIGHT
OO
VHF-UHF/CABLE
OUTPUT
SPEAKER
AUX
INPUT
VIDEO
AUDIO
000
STEP 3. MAKE AUDIO CONNECTION
TO STEREO
AMPLIFIER
Using an External Amplifier with Speakers While the
TV's Speakers are OFF.
1. Place the SPEAKER EXT/INT switch on the TV in the
1NT position (TV's
speakers
are ON).
2. Turn the TV ON. Increase the volume level of the TV
until the sound just starts to distort (sound bad).
3. Place the SPEAKER EXT/INT switch on the TV in the
EXT position (TV's speakers are OFF).
4. Turn the external audio amplifier ON. Adjust the vol-
ume level of the audio amplifier for the highest
level
you will need for your listening
pleasure.
5. Adjust the volume
level of the TV for the normal
listening
level as heard through the speakers of your
audio amplifier.
Using an External Amplifier with Speakers While the
TV's Speakers are ON.
1. Place the SPEAKER
EXT/INT
switch on the TV in the
INT position (TV's
speakers
are ON).
2. Turn the TV ON. Increase
the volume level of the TV
until the sound just starts to distort (sound bad).
3. Turn the external
audio amplifier
ON. Adjust the vol-
ume level of the audio amplifier
for the highest level
you will need for your listening
pleasure.
4. Adjust the volume level of the TV for the normal listening
level as heard through the speakers of the TV.
NOTE: If the volume of the internal TV speakers is set too
low, you may hear undesirable noises through the speakers
connected to your audio amplifier.
VHF-UHF/CABLE
Panel
on Backof
I
Stereo
Amplifier
00
VARIABLE AUDIO
OUTPUT
SPEAKER
AUX INPUT
VIDEO
AUDIO
©©©
RIGHT
LEFT
I
I
To External
Speakers
2732-0
1 -- 3
Advertisement
Table of Contents
