Table of Contents
Advertisement
PREPARATION > Connecting speakers
Making bi-wiring connections
Bi-wiring allows output to the speaker woofers (low frequency) and the tweeter/mid-range (mid to high-
frequency) to be split and driven separately. Speakers compatible with bi-wiring are required for these
connections.
1
Remove the short bar or bridge attached to the jacks of the speakers.
2
Connect the product and the speakers as illustrated.
The illustration shows connecting the left channel. Connect the right channel in the same way.
Swapping the connections between speaker jacks A and B is OK.
SPEAKERS L CH
Rear panel
NOTE
When the speakers have been bi-wired, it is necessary after turning the product ON to change the speaker setting to A+B before
(
running YPAO.
Use speakers with an impedance of at least 4 Ω and that are compatible with bi-wiring connections.
(
Related links
"Running YPAO" (p.42)
(
"Selecting the output speakers" (p.50)
(
A
B
Speaker
30
Advertisement
Table of Contents
