Enable Mld Snooping With-Proxy - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IPv6 Multicast Commands

enable mld snooping with-proxy

enable mld snooping with-proxy
Description
Enables the MLD snooping proxy. The default setting is enabled.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Enabling the proxy allows the switch to suppress the duplicate join requests on a group to forward to
the connected Layer 3 switch. The proxy also suppresses unnecessary MLD leave messages so that they
are forwarded only when the last member leaves the group.
This command can be used for troubleshooting purpose. It should be enabled for normal network
operation. The command does not alter the snooping setting.
Example
The following command enables the MLD snooping proxy:
enable mld snooping with-proxy
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1884
ExtremeWare XOS 11.5 Command Reference Guide