Disable Bgp Peer-Group Soft-In-Reset - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
BGP Commands

disable bgp peer-group soft-in-reset

disable bgp peer-group <peer-group-name> {address-family [ipv4-unicast |
ipv4-multicast]} soft-in-reset
Description
Disables the soft input reset feature.
Syntax Description
peer-group-name
address-family
Default
Disabled.
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
Disabling the soft input reset feature can potentially limit the amount of system memory consumed by
the RIB-in.
Example
The following command disables the soft input reset feature:
disable bgp peer-group outer soft-in-reset
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
Platform Availability
This command is available on platforms with a Core or an Advanced Core license.
1754
Specifies a peer group.
The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast.
ExtremeWare XOS 11.5 Command Reference Guide