Clear Igmp Snooping - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

clear igmp snooping

clear igmp snooping
clear igmp snooping {{vlan} <name>}
Description
Removes one or all IGMP snooping entries.
Syntax Description
name Specifies a VLAN name.
Default
N/A.
Usage Guidelines
This command can be used by network operations to manually remove IGMP snooping entries
instantly. However, removing an IGMP snooping entry can disrupt the normal forwarding of multicast
traffic, until the snooping entries are learned again.
The static and dynamic IGMP snooping entries will be removed, then recreated upon the next general
query. The static router entry is removed and recreated immediately.
This command clears both the IGMPv2 and IGMPv3 snooping entries.
Example
The following command clears IGMP snooping from VLAN accounting:
clear igmp snooping accounting
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
1789
ExtremeWare XOS 11.5 Command Reference Guide