Extreme Networks ExtremeWare XOS Command Reference Manual page 1856

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
IP Multicast Commands
Source Specific Multicast : Enabled
Neighbor IP address
21.1.1.1
Packet Statistics (In/Out)
Hellos
Join/Prunes
Grafts
The following command displays the PIM configuration and statistics for the VLAN side:
show pim side
The following is sample output from the command:
PIM SPARSE Interface[3] on VLAN side is enabled and up
IP adr: 21.1.1.2
Passive
Hello Interval
Neighbor Time out
Join/Prune Interval
Join/Prune holdtime
Trusted Gateway
CRP group List
Shutdown priority
Source Specific Multicast : Enabled
Neighbor IP address
21.1.1.1
Packet Statistics (In/Out)
Hellos
Join/Prunes
Grafts
The following command displays the elected, active RP for the group 239.255.255.1:
show pim rp-set 239.255.255.1
The following is sample output from the command:
Group
224.0.0.0
224.0.0.0
224.0.0.0
239.255.255.0
Elected RP is 124.124.124.124
History
This command was first available in ExtremeWare XOS 10.1.
The PIM-SSM information was added in ExtremeWare XOS 11.4.
1856
Generation Id
0x42dbd7f3
8 9
0 4
0 0
mask: 255.255.255.0
: No
: 30 sec
: 105 sec
: 60 sec
: 210 sec
: none
: none with priority 0
: 1024
Generation Id
0x42dbd7f3
8 9
0 4
0 0
Mask C-RP
240.0.0.0 10.10.10.2
240.0.0.0 124.124.124.124 Bootstrap 0
240.0.0.0 124.124.124.124 static
255.255.255.0 124.124.124.124 Bootstrap 0
Expires
77
Bootstraps
Asserts
GraftAcks
DR of the net: 21.1.1.2
Expires
77
Bootstraps
Asserts
GraftAcks
Origin Priority
Bootstrap 0
0
ExtremeWare XOS 11.5 Command Reference Guide
0 0
0 0
0 0
0 0
0 0
0 0