Using The Auto Aspect Ratio Feature; Using The 4:3 Stretch; Using The Freeze Feature - Toshiba 52ZV650U Owner's Manual

Scrollingthe picture
If the edges of the picture are cut off, you can adjust
the position image.
Note: You can adjust the picture position when the picture
size is set to TheaterWide 2 or TheaterWide 3.
1
2
3
From the SETUP menu, highlight Picture
Position.
Press • or • to select Vertical Position.
Press < or _" to make the appropriate
adjustments. The adjustment range is from -5 to
+10.
Note: This feature is not available on digital channels.
Usingthe AutoAspectRatio
feature
When the auto aspect ratio feature is set to On, the
TV will automatically select the picture size when
one of the following input sources is received:
• A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
• A 480i signal from the Video 1 or Video 2 input
• A 480i signal from the ColorStream HD1 or HD2
input
• A 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/
75Hz) signal from the HDMI 1121314 input
Note: The auto
aspect
ratio feature is not
applicable
to the
PC
input.
1
2
From the PREFERENCES menu, highlight Auto
Aspect.
Press
< or I_ to select
On, and then press _.
Usingthe 4:3 Stretch
When 4:3 Stretch is activated, the size switching
system changes 4:3 programs into full screen picture.
1
From the PREFERENCES menu, highlight 4:3
Stretch.
2 Press < or I_ to select On, and then press _.
Note: When Auto Aspect is set to Off, this feature will be
grayed out.
Usingthe FREEZE feature
1 When viewing the TV, press _ to make the
picture a still picture.
2 To return to the moving picture, press [_fffl again.
Note: tf the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be
released and the TV will return to moving picture.
Using the FREEZE function for any purpose other than
your private viewing may be prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and criminal
liability.
48