Setting The On Timer; Setting The Sleep Timer - Toshiba 52ZV650U Owner's Manual

Settingthe OnTimer
You can set the on timer to automatically turn on the
TV to a preset channel or input at a preset time.
To activate the On Timer:
1 From the APPLICATIONS menu, highlight On
Timer and press {_.
2
Press • or • to select Enable On Timer, and
then press 4 or •to select On.
Note: If the Enable On Timer is set to Off, other menus
under On hmer cannot be selected.
To set the On Timer:
1
From
the APPLICATIONS
menu, highlight
On
Timer
and press
_.
Input: To select video input source (ANT/
CABLE, Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
HDMI 4 or PC)
Channel: To select the channel when the TV
turns on.
Note: When an external input is selected in the Input
menu, this feature cannot be selected.
Volume: To set the volume when the TV turns
on.
Time until Power On: To set the time when the
TV turns on from now with < or • or the number
buttons (maximum of 12 hours and 50 minutes).
Note:
• While the On Timer is set to On, the On Timer LED is
turned on (lr_ "LED indications" on page 73).
• If you do not operate the TV for 1 hour after it is powered
on by the On Timer feature, the TV will automatically turn
itself off.
To cancel the On Timer:
1
2
3
From the APPLICATIONS menu, highlight On
Timer and press 4.,_.
Press • or • to select Enable On Timer.
Press < or • to select Off.
Settingthe SleepTimer
You can set the sleep timer to turn off the TV after a
set length of time (maximum of 12 hours and 50
minutes).
To set the sleep timer using the remote control:
Pr
SLEEP
y
ess O on the remote control to set the length of
time until the TV turns off. Repeatedly press_ Epto
increase the time in 10-minute increments, or press
• or • to increase or decrease the time in 10-minute
increments, to a maximum of 12 hours and 50
minutes.
To set the sleep timer using the on-screen menus:
1
From the APPLICATIONS menu, highlight
Sleep Timer and press _.
2 Press the number buttons to enter the length of
time or press < or • to increase or decrease in 10-
minute increments (maximum of 12 hours and 50
minutes).
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
Press s_EP.
To cancel the sleep timer:
Repeatedly press SteEP until it is set to 0 minutes.
58