Scrolling The Theaterwide® Picture; (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature; Selecting The Cinema Mode - Toshiba 40RV52R Owner's Manual

You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
To turn off the auto aspect ratio feature:
Select
Off
in step 3 above.
Selecting the cinema mode
To turn on the auto aspect ratio feature:
1
Press
M~U
and open the
Video
menu.
2
Highlight
Theater Settings
and press @.
3
In the
Auto Aspect Ratio
field, select
On.
4
To save the new settings, highlight
Done
and press @.
To revert to the factory defaults, highlight
Reset
and
press@.
Sports
Video
Mode
To set the scroll settings:
1
Press M~U and open the
Video
menu.
2
Highlight
Theater Settings
and press @.
Picture Settings
Noise Reduction
Game Mode Off
3
In the
Picture Size
field, select either
TheaterWide 2
or
TheaterWide 3
(you cannot scroll in any other mode).
4
Press'" to highlight the
Picture Scroll
field.
5
Press .... or
~
to scroll the picture up and down as needed.
6
To save the new settings, highlight
Done
and press @.
To revert to the factory defaults, highlight
Reset
and press
@.
Note: When receiving
a
signal at 480i resolution, the picture
scroll function may have limited adjustment range.
Using the auto aspect ratio feature
When you view a OVO (3:2 pulldown processed) from a DVD
player connected to the
VIDEO 1, VIDEO 2, ColorStream HD-1,
ColorStream HD-2
(component video), or
HDMI
inputs on the
TV, smoother motion can be obtained by setting the
Cinema
Mode
to
Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1
Press
M~U
and open the
Video
menu.
2
Highlight
Theater Settings
and press @.
3
In the
Cinema Mode
field, select
Film.
4
To save the new settings, highlight
Done
and press @.
To revert to the factory defaults, highlight
Reset
and
press@.
1
When the auto aspect ratio feature is set to
On,
the TV
will automatically select the picture size when one of the
following input sources is received:
• A 480i, 480p, nop, I080i digital signal from the
ANT/CABLE
input
• A 480i signal from the
VIDEO 1
or
VIDEO 2
input
• A 480i signal from the
ColorStream HDl
or
HD2
input
• A 480i, 480p, nop, I080i, 1080p, or VGA (60Hz) signal
from the
HDMI1/2/3
input
Aspect ratio of Automatic. aspeCt size (automaticaUy
signalsource ., selected when Auto Aspect isOn)<
4:3 normal Natural (with sidebars)
To set the Cinema Mode to Video:
Select
Video
in step 3 above.
Using the FREEZE feature
To use the FREEZE feature:
Wh
. . h TV
FREEZE
k h .
en viewmg t e , press
0
to rna e t e picture a
still picture.
2
To return to the moving picture, press
FR~ZE
again (or any
other button).
4:3 letter box TheaterWide 2
16:9 full Full
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Not defined
(no ID-I data
or HOMI
aspect data)
The cunent picture size you set under
"Selecting the picture size" on page 37.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note: The auto aspect ratio feature is not applicable to PC
input.