Table of Contents
Advertisement
Connectinga DVDplayer with ColorStream ® (componentvideo),
a VCR,and a satellite receiver
Your TV has two sets of ColorStream
;!_(component
video)
inputs.
:,
_d[
DVD player with componentvideo
TVupper backpanel
N--
HD1
!CN¢
IN
iN
PC IN
From sate!lite dish
Satellite receiver w ithcomponent video
TVlowerback panel
Frorn antenna
Stereo VCR
,
//_--]
?L
You will need:
• coaxial
cables
• standard
A/V
cables
- For better picture performance, if your VCR has S-
video, use an S-video cable (plus the audio cables)
instead of the standard video cable. Do not connect
both types of video cable to VIDEO 1 at the same time
or the picture performance
will be unacceptable.
If you have a mono VCR, connect L/_ONO
on the TV
to your VCR's audio out terminal using the white audio
cable only.
• standard
audio
cables
• component
video
cables
You can connect the component video cables (plus
audio cables) from the DVD player or satellite receiver
to either set of ColorStream
terminals on the TV (HD1
or HD2). The ColorStream
HD1 and HD2 terminals
can be used to display Progressive (480p, 720/9,
1080p) and Interlaced (480L 1080i). Please check the
Owner's Manual of the DVD player or satellite in order
to determine the best output signal available (1080p
24Hz/30Hz/50Hz/25Hz
are not supported).
If your DVD player or satelfite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel. If your DVD player has
HDMI video, see page 16.
To view
antenna
or Cable
channels:
Select the ANT/CABLE
video
input
source
on the
TV.*
To view
the DVD
player:
Turn
ON the DVD player.
Select
the ColorStream
HD1 video
input
source
on the TV.*
To view
satellite
programs
using
the component
video
connections:
Turn
on the satellite
receiver.
Select the
ColorStream
HD2 video
input
source
on the TV.*
To view
the VCR
or view
and record
antenna
channels:
Turn
ON the VCR. Tune
the VCR to the channel
you
want
to watch.
Select the VIDEO 1 video
input
source
on the TV.*
To record
a TV program
while
watching
a DVD:
Turn
ON the VCR. Tune
the VCR to the channel
to
record.
Select the ColorStream
HD1 video
input
source
on the TV* to view
the DVD.
* To select the video
input source,
press INPUT
on the
remote control (_._ page 41 ). To program
the TV remote
control
to operate
other devices,
see Chapter
3.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes,
DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other
countries, and may subject you to civil and
criminal liability.
14
Hide quick links:
Advertisement
Table of Contents
