Using The Static Gamma Feature; Using The Auto Aspect Ratio Feature - Toshiba 26AV500U Owner's Manual

Usingthe static gammafeature
The static gan3ma feature allows you to adjust the levels of
black in the picture_
To adjust the static gamma settings:
1 MENU
Press © and open the Video metal
2 Highlight Advanced Picture and press _ or_.
3 Highlight Static Gamma and press _(._,a new
adjustment bar will appear as below.
4
In the Static Gamma field, press _ or _" to adjust the
static gamma_
The adjustment range is within _+5 from center:
• [f the setting is moved in the minus dhecfion, the detail
of black colors will be decreased,
• [f the setting is moved in the plus direction, the detail of
Hack colors will be increased.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
• A 480i signal from the VIDEO 1, VIDEO 2 input.
• A 480i, 480p, 720p, 1080i signal from the HDMI input.
4:3 normal Naural (with sidebars)
16:9 full Full
Not defined
(no lD-I data The current picture size you set under
or HDM[ "Selecting the picture size" on page 33.
aspect data)
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
"! Press ={_uand open the Video menu.
2 Highfight Advanced Picture and press _ or _.
3 Highlight
Auto Aspect Ratio
and press _ or_ to
select On or Off.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
44