Editing With Another Vcr - Sony SLV-N81 Operating Instructions Manual

Editing with another VCR
How to connect to record on this VCR
This VCR (Recorder)
l
Audio/video cable (not supplied)
: Signal flow
TV
Other VCR (Player)
Notes
• Make sure you connect the plugs to lacks of the same color.
• If the other VCR is a monaural type and connected to this VCR_s LINE-2 IN jacks, connect
the audio plug m the AUDIO L (white)jack. The sound is recorded on both right and let_
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• You can use the LINE-I IN jacks ft_r editing. If the other VCR is a monam'aI type, the sound
is recorded only on the channel whose jack is connected to the audio plug. lb record on both
right and left channels, connecl the audio plugs to the AUDIO R/L jacks using a VMC-
910HG audio/video cable (not supplied).
How to record on another VCR that has a CONTROL S OUT jack for
synchronized editing (SLV-N81 only)
Connect to record on the other VCR using the audio/video cable, then connect the
VCRs via the CONTROL S jacks using a Control S cable. The CONTROL S
connection lets you control (pause and release pause) both VCRs fi-om the other
VCR. Connect the CONTROL S OUT jack of the other VCR to the CONTROL S IN
jack on this VCR.
Note
• (SLV-N8I only)
If the _ ONTROL S IN jack is used for Control S connection with a IV, the CONTROL S
connection cmmot be used lk_r editing.
94 EditingwithanotherVCR