Sony SLV-N81 Operating Instructions Manual page 29

3 @ Press _/,_ to highlight AUTO, then press
OK.
CLOC_ SET CH
TIMEZOr_E
DAYI IGHT _'Vlr_G
_ETURN
Press _/,_, to highlight FULL AUTO, then
press OK.
5 @ Press _/,_, to highlight YES, then press OK.
MENU Press MENU to exit the menu.
O
7
To activate the Auto Clock Set function, turn off the VCR. "ACS" will flash
in the display window.
The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving Time (if
applicable).
If your clock is set to the wrong time zone or Daylight Saving Time, you
can adjust these settings without turning offthe Auto Clock Set feature
(page 30).
Tip
[f you _aant to retm'n to the pre_ ious menu, highlight RE I'URN and press OK.
Notes
• The clock camlot be set autum_icatly it'you don't receive a channel that can'ies a time signal
in your area. If so, set the clock manually (see page 33).
• If there are only a few channels in your area tb_ carry time signals, settling the clock
automatically may take up tu about 30 minutes. If nothing happens even al_er you wait about
30 minutes, set the clock manually.
• If you use Hookup I or 5, make sure you leave the cable box on.
• If the clock is not set, "ACS" will flash i_ the display window wbenever the VCR is turned
ofiL Duri_g this time, the VCR will search for a time signal.
continued
Setting the clock
129
I