Sony SLV-N81 Operating Instructions Manual page 8

Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. if your TV is
• . . _ •
hsted m the following table, set the appropriate mant f_actt rer s code number.
1 Set oTV / VIDEO at the top of the remote commander to oTV.
Hold down I/Q), and enter your TV's code number using the number buttons.
Then release I/Q).
Now you can use the I/Q), VOL +/, CH +/, and TV/VIDEO buttons to control your
TVI You can also use the buttons marked with a dot (o) to control a Sony TVI _1_
control the VCR, reset oTV / VIDEO to VIDEO.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TVI
Code Code Code
TV brand TV brand TV brand
number number number
Sony 01 JV(" 09 RCA 04, 10
Akai 04 KMC 03 Sampo 12
AOC 04 Magnavox 03, 08, 12 Sanyo I 1
Centurion 12 Marantz 04, 13 Scott 12
Coronado 03 MGAiMitsubishi 04.12, 13, I7 Sem's 07, 10, 1 t
Cmtis-Matbes 12 NEC 04, 12 Sharp 03, 05, 18
Daytron 12 Panasonic 06, 19 Sylvania 08, 12
Emerson 03, 04, t 4 Philco 03, 04 leknika 03, 08, 14
Fisher 11 Philips 08 1oshiba 07
General Elech'ic 06, 10 Pioneer I6 Wards 03, 04, 12
Gold Star 03, 04, t 7 Poltland 03 Yorx 12
Hitachi 02, 03 Quasar 06, 18 Zenith 15
J.C.Pemley 04, 12 Radio Shack 05, 14
Notes
• If you enter a new code number, the code nmnber previously entered will be erased.
• If the TV uses a differet_t remote control system from tbe one programmed to work with the
VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may cba_ge. Set
the appropriate code number every time you replace the batteries.
• Wheny°upresstbeAUDIOMONITORbutt°n'y°url'V'smenumayappear°ntheTV
screen. To exit the 1V menu, press the MENU button on the TV remote commander or wait
until the menu disappears automatically.
8 Setting up the remote commander