Firmware Upgrade - Samsung HT-BD3252 User Manual

Samsung may offer upgradesto your Blu-rayHomeTheater's firmware in the future.To upgradethis firmware you must :
1. Go to samsung.com and refer to the 'Support' page to download the latest firmware.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see "Upgrade
Manual" at the website mentioned above.
or
2. Connect the network (see pages 30-31) and follow the steps below.
FIRMWARE UPGRADE
1. With the unit inStop mode/No Disc mode, press the
MENU button.
2. Press the ,_ T _1 _ buttons to select Setup, then press
the ENTER or _ button.
3. Press the A T buttons to select System, then press the
ENTER or _- button.
4. Press the A T buttons to select System Update, then
press the ENTER or _- button.
5. The player will check the cable or network connection
status automatically. The connection checking window will
be displayed.
[] If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
[] If the upgrade is not possible : You will see the following
description in the message box.
• If the cable is not connected :
"Ethernet cable is not connected. Please, check the
Ethernet cable"
• If the network connection has failed :
"This system can not connect to internet for update.
Please, check the network setup"
• If no latest version is released (the latest version has
been already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
• If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the
unit to perform the update.
• If the server service is not available :
" Update Server is under maintenance. Please try again
later."
59