Setting
the Test Tone
Use the Test Tone feature to check the speaker connections.
1, With the unit inStop mode, press the MENU button.
2, Press the ,_ T 4 I_ buttons to select Setup, then press
the ENTER or I_ button.
3, Press the ,_ T buttons to select Audio, then press the
ENTER or _ button.
Audio setup menu will be displayed.
4. Press the ,_ T buttons to select Test Tone, then press
the ENTER or _ button.
5. Press the RED(A) button
A test tone will be sent to Front Left -_ Center -_
Front Right -_ Surround Right -_ Surround Left -_
Subwoofer in order so you can make sure the
speakers are set up correctly.
6. To end the test tone, press the RED (A) button again.
®
_ Press the RETURN button to return to the previous
menu.
_ When playing a BD/DVD or CD, this will work only in
Stop mode.
_ Use this function to check that each speaker is
correctly connected and that there is no problem.
_ When HDMI Audio is on (audio is produced through
TV speakers), the Test Tone function is not available.
43