Samsung HT-BD3252 User Manual page 27

CONNECTING AN iPod
You can enjoy music and video filesfrom an iPod through the main unit. For iPod operation with this Blu-ray home
theater, see this page and pages 84 - 86.
(supplied)
1. Connect the iPod Dock to the iPod Jack on the rearside of the main unit.
2. Place the iPod in the dock.
,, "iPod Connected" message appears on the TV screen.
®
_ You must have the VIDEO output connected to your TV to view iPod video (see page 26).
_ Adjust the volume to a moderate levelbefore you connect your iPod and Blu-ray home theater.
_ When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
_ Make sure to connect the dock connector so that the label "SAMSUNG" faces upward.
iPod models that can be used with the HT-BD3252
iPod nano 3rd iPod 5th generation iPod classic iPod touch
generation (video) (video)30GB 60GB 80GB 120GB 160GB 2nd generation
4GB 8GB 80GB 8GB 16GB 32GB
iPod touch iPod nano iPhone 3G iPhone
1st generation 4th generation(video) 8GB 16GB 4GB 8GB 16GB
4GB 16GB 32GB 8GB 16GB
"Made for iPod" means that an electronicaccessory has been designed to connect specificallyto the
iPod and has been certified by the developer to meet Apple performance standards.
"Works with iPhone" means that an electronic accessory has been designed to connect
specifically to an iPhone and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries, iPhone is a
trademark of Apple Inc.
27