Samsung HT-BD3252 User Manual page 42

SETTING UP THE SPEAKER OPTIONS
Setting the Auto Sound Calibration
To set the Auto Sound Calibration
1. Plug the ASC microphone into the ASC input jack.
2. Place the ASC microphone at the listening position.
3. With the unit in Stop mode, press the MENU button.
4. Press the ,_ T < !_ buttons to select Setup, then press
the ENTER or _- button.
5. Press the ,_ T buttons to select Audio, then press the
ENTER or _-button.
• Audiosetupmenuwill be displayed
6. Press the ,_ T buttons to select Auto Sound Calibration
then press the ENTER or _-button.
AutoSoundCalibration menuwill bedisplayed.
7.
Press the ,_ T buttons to select Auto Sound Calibration
Setup, then press the ENTER or _button.
• Auto Sound Calibration will be automatically set up in
the following sequence:
Front Left _ Center -* Front Right -* Surround
Right _ surround Left _ Subwoofer
8. When the message "REMOVE MIC" appears in the
display, unplug the ASC microphone.
To cancel the Auto Sound Calibration Setup
Press the ENTER button.
42
To listen in the ASC (Auto Sound
Calibration) mode
Follow steps 1-6 above.
7. Press the ,_ T buttons to select Auto Sound Calibration
then press the ENTER or _-button.
8. Press the < _ buttons to select On or Off, then press the
ENTER or _-button.
If you select On, you will hear sound in the ASC mode
If you select Off, you will hear sound in the mode set in the audio setting menu,
(_ _ Setting the ASC function takes about 3 minutes.