Setting Up The Network Setup Options - Samsung HT-BD3252 User Manual

¢¢tuD
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings on your computer or contact
your Internet provider.
To set the network of your Blu-ray Home Theater, follow the steps below.
1. With the unit inStop mode/No Disc mode, press the
MENU button.
2. Press the ,_ T 4 _,-buttons to select Setup, then press
the ENTER or _ button.
3. Press the ,_ T buttons to select Network, then press the
ENTER or _- button.
4. Press the ,_ T buttons to select the desired network
option from the options descnbed below, then press the
ENTER or _ button.
5. Press the ,_ _' buttons to select the desired item, then press the ENTER button.
Each network option is descnbed in detail below.
Network Selection
Select Cable or Wireless as the method to connect to the
network.
To setup, follow steps 1-3 above.
4. Press the ,_ T buttons to select Network Selection, then
press the ENTER or _ button.
,, Cable : Select this to connect to the network using a
cable. (see page 30)
,, Wireless : Select this to connect to the network
wirelessly. (see page 31)
Cable Network
To setup, follow steps 1-3 above.
4. Press the A T buttons to select Cable Network, then
press the ENTER or _,-button.
5. Press the ,_ _' buttons to select DNCP, then press the
ENTER button.
®
_* If DHCP is set to On, you can't select IP Address,
Subnet Mask or Gateway.
_* If DNS is set to Auto, you can't select Primary/
Secondary DNS.
53