Samsung HT-BD3252 User Manual page 55

5. Press the _, _' buttons to select DHCP, then press the
ENTER button.
®
_ If DHCP is set to On, you can't select IP Address,
Subnet Mask or Gateway.
_ If DNS is set to Auto, you can't select DNS Server.
6. Press the ,_ T buttons to select a desired item, then press
the ENTER button.
,, Select an Access Point, and then press the ENTER
button to display an available list of APs.
(It may take several seconds to search.)
- When you select an AP and press the ENTER button, it
tnes to connect to the designated AP.
- If successful, a notification appears.
(If selected AP shows a Lock icon, you may need to
provide secunty authentication.)
- Select your appropnate Secunty Access Point if it is
known. If it is not, select WEP, WPAPSK or WPA2PSK
from the list and enter in the password. Keep trying each
Secunty Access Point and enter the Password until a
connection is made.
- Enter in the Password then press the BLUE (D)
button to connect to your access point (Router).
For further details on AP secunty, refer to the AP's (Router)
user manual.
,, If DHCP is set to Off and, DNS to Manual, enter your
IP Address, Subnet Mask, Gateway and DNS Server.
Setup available
55