Setting Up The Speaker Options - Samsung HT-BD3252 User Manual

Aud o ¢OtUD
SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
This is only active when a Dolby Digitalsignal is detected.
On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible
and prevent dramatic passages from getting too loud.
,, Off : You can enjoy the movie with the standard Dynamic
Range.
AV Sync
Video may look slower than the audio when the player is
connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
,, You can set the audio delay time between 0 msec and 300
msec. Set it to the optimal status.
Setting the Speaker Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay
time of the audio signals from the front, subwoofer, center,
surround speakers.
1. With the unit inStop mode, press the MENU button.
2. Press the ,_ '!, 4 _- buttons to select Setup, then press the
ENTER or _- button.
3. Press the ,_ v buttons to select Audio, then press the
ENTER or _ button.
o Audiosetupmenuwill bedisplayed,
4. Press the ,_ T buttons to select Speaker Distance,
then press the ENTER or _- button.
5. Press the ,_ T buttons to select the desired Speaker,
then press the -_ _- buttons to set the Speaker Distance.
Youcan setthe Speaker Distance betweenlft(O,3m) a nd
3Oft(9 Ore),
6. When done, use the ,_ T 4 _- buttons to select Save,
then press the ENTER button.
Ifyou don't want to save your settings, use the ,_ T 4
buttons to select Cancel, then press the ENTER button.
(_ _* Press the RETURN button to return to the previous
menu.
39