Samsung HT-BD3252 User Manual page 54

5.1ch blu-ray home theater system
Hide thumbs Also See for HT-BD3252:
Table of Contents

Advertisement

SETTING UP THE NETWORK
SETUP OPTIONS
6. Press the A _' buttons to select a desired item, then
press the ENTER button.
,, If DHCP is set to Off and, DNS to Manual, enter
your IP Address, Subnet Mask, Gateway and
Primary DNS settings (Secondary DNS is optional).
,, If DHCP is set to On and, DNS to Manual, enter
your Primary DNS setting (Secondary DNS is
optional).
Setup available
• If DHCP is set to On and, DNS to Auto, you don't
need further or additional settings.
Setup not available
} _* When you select an item, use the number
and ,_ T _ _ buttons.
_* If the automatic settings don't work, contact
your ISP.
Setup not available
7. When done, use the ,_T buttons to select Save, then press the ENTER button.
8. If you don't want to save your work, use the ,_ T -_ _- buttons to select Cancel, then press the
ENTER button.
[_[}
_ The IP address used in this manual is for illustrative purposes only. You must refer to your
network settings for the actual IP address.
_ To obtain settings for IP Address, Subnet Mask, Gateway and Primary DNS, check the
network settings in your computer or contact your internet service provider.
Wireless
Network
To setup, follow steps 1-3 on page 53.
4. Press the A T buttons to select Wireless Network,
then press the ENTER or _- button.
54

Advertisement

Table of Contents
loading

Table of Contents