Configuration Menu Selections; Utilities - Lexmark E260dn Service Manual

4513-220, -230

Configuration menu selections

To enter the Configuration menu:
1.
Turn off the printer.
2.
Open the front access door.
3.
Turn on the printer while pressing and holding Continue
4.
Close the front access door once the Error
Print menus by pressing and holding

Utilities

Use the Utilities menu to troubleshoot printer problems.
Setting
Reset Factory Defaults
Hex Trace
Print Quality Test Pages
Reset Photoconductor
Maintenance Counter
3-4
Lexmark™ E260d, E260dn
until all of the lights flash.
Use setting to
Return the printer settings to factory default values.
Sometimes resetting the printer to the original settings solves formatting problems.
All menu items are reset to the factory default values except:
• All settings in the Parallel menu, Network menu, and USB menu.
• All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM)
are deleted.
Resources in flash memory are unaffected.
Help isolate printing problems when
unexpected characters print or
characters are missing.
Hex Trace helps determine if there is a
problem with the language interpreter
or the cable by providing information
about what the printer is receiving.
To exit Hex Trace, turn off the printer.
Help isolate print quality problems, such as streaking. Four pages print to help evaluate
print quality:
• A text page with printer information, cartridge information, current margin settings,
and a graphic.
• One page is gray with graphics, one is black, and one is blank.
Return the photoconductor counter to zero.
The replace photoconductor message should be cleared only when the photoconductor
kit has been replaced.
.
light displays.
Values
Off (default)
On