Main Motor Gear Drive Removal - Lexmark E260dn Service Manual

Main motor gear drive removal

1.
Remove the left side cover. See
2.
Open the front access door, and disconnect the fuser link (A).
3.
Place the printer on its right side.
Note: Be careful to not mar the finish of the printer.
4.
Remove the four screws (B) from the main motor gear drive.
Note: The picture below shows the E360d, E360dn printer. The main motor gear drive removal is the same for
all models.
"Left side cover removal" on page
A
B
4513-220, -230
4-23.
Repair information
4-29