Diagnostic Aids; Accessing Service Menus; Printing Menus; Moving Around The Menu - Lexmark E260dn Service Manual

3. Diagnostic aids

Accessing service menus

There are two different test menus that can be accessed during POR to identify problems with the printer.
Configuration Menu
Diagnostics Mode

Printing menus

Print Configuration menus by pressing and holding Continue
button. The Configuration Mode Instruction page will print.
Print Diagnostic menus by pressing and holding Continue
The Ready/Data light will blink when the page is being formatted and printed.
Note: The Configuration Mode Instruction page and Diagnostic menu page in this manual are samples only and
may not match your specific machine.

Moving around the menu

"Configuration Menu printout" on page 3-2
similar to the instructions printed by following steps 1-3 above. These menu items are designated by the non-
indented items listed along the left edge of the page (Bottom as printed from printer). These items are also
unshaded.
•
•
•
•
1. Turn off the printer.
2. Open the front access door.
3. Turn on the printer while pressing and
holding Continue .
4. Close the front access door once the Error
light displays.
1. Turn off the printer.
2. Open the front access door.
3. Turn on the printer while pressing and
holding Cancel .
4. Close the front access door once the Error
light displays.
Press and release to move sequentially from one menu item to another.
Press and hold to jump to home state (top four lights on).
Press and release to move through the menu settings (indicated by
This action rotates only through the possible settings of the selected menu item.
The Configuration menu group contains a set
of menus, settings and operations which are
infrequently required by a user. Generally, the
options made available in this menu group are
used to configure a printer for operation.
See "Configuration menu selections" on
page 3-4.
The Diagnostic menu group contains the
settings and operations used while
manufacturing and servicing the printer.
See "Diagnostics mode selections" on
page 3-8.
until all of the lights flash, then release the
until all of the lights flash, then release the button.
and "Diagnostics mode printout sample" on page 3-3
4513-220, -230
are
and lights).
3-1
Diagnostic aids