Ppds Font Error; Insufficient Defrag Memory - Lexmark E260dn Service Manual

4513-220, -230
Resource save off - deficient memory
Meaning
This error message indicates that too much memory has been allocated to link buffers or that some printer settings are
using more memory than the default setting.
Action
Add more memory, change link buffers or reset the printer settings that have been changed.

PPDS Font error

Meaning
The printer does not have enough memory to save the data in the buffer.
Action
• Install additional memory.
• Press Continue
• Press Cancel to cancel the print job.

Insufficient defrag memory

Meaning
The printer memory does not have the free space necessary to collate the print job. This may happen due to one of these
errors:
• Memory is full.
• A page is too complex to print.
• A page is shorter than the set page margins.
• Memory is insufficient to save what is in the buffer.
Action
• Press Continue
• Press and release Cancel
• Press and hold Cancel
To avoid this error in the future:
• Simplify the print job. Reduce the complexity of the page by reducing the amount of text or graphics on the page
and deleting unnecessary downloaded fonts or macros.
• Install additional printer memory.
2-22
Lexmark™ E260d, E260dn
✷
to continue printing the job.
✷
to clear the message and continue printing the job. (The job may not print correctly.)
to cancel the print job.
to reset the printer.