The Font On The Printout Is Different From That On The Screen; The Printer Fonts Cannot Be Installed; The Edges Of Texts And/Or Images Are Not Smooth; The Printer Does Not Print Normally Via The Usb Interface - Epson Aculaser M2000 series User Manual

The AppleTalk zone setting is incorrect.

The font on the printout is different from that on the screen

Cause
The PostScript screen fonts are not installed.
For Windows users only
The appropriate substitution fonts are not correctly
specified on the Device Settings sheet of the printer's
Properties dialog box.

The printer fonts cannot be installed

Cause
The Emulation menu in the printer's Control Panel is
not set to PS3 for the interface that you are using.

The edges of texts and/or images are not smooth

Cause
The Print Quality is set to Fast.
The printer does not have sufficient memory.

The printer does not print normally via the USB interface

Cause
Open the Printer Setup Utility (Mac OS 10.3.x and 10.4.x) or
Print Center (Mac OS 10.2), then select the AppleTalk zone
that the printer is connected to.
What to do
The PostScript screen fonts must be installed on the computer
that you are using. Otherwise, the font that you select is
substituted by some other font for display on the screen.
Specify the appropriate substitution fonts using the Font
Substitution Table.
What to do
Change the Emulation Menu setting to PS3 for the interface
that you are using, then try reinstalling the printer fonts again.
For details about setting, see the Network Guide.
What to do
Change the Print Quality setting to Fine or Maximum.
Increase the printer memory.
What to do
Troubleshooting 108