Advertisement
bridge multicast address {mac-multicast-address | ip-multicast-address} [add | remove]
{ethernet interface-list | port-channel port-channel-number-list}
no bridge multicast address {mac-multicast-address | ip-multicast-address}
•
add — Adds ports to the group. If no option is specified, this is the default option.
•
remove — Removes ports from the group.
•
mac-multicast-address — MAC multicast address in the format of xx:xx:xx:xx:xx:xx.
•
ip- multicast-address — IP multicast address.
interface-list — Separate non-consecutive Ethernet ports with a comma and no spaces; a
•
hyphen is used to designate a range of ports.
•
port-channel-number-list — Separate non-consecutive port-channels with a comma and
no spaces; a hyphen is used to designate a range of ports.
Default Configuration
No multicast addresses are defined.
Command Mode
Interface configuration (VLAN) mode
User Guidelines
•
If the command is executed without add or remove, the command only registers the group in
the bridge database.
•
Static multicast addresses can only be defined on static VLANs.
Examples
The following example registers the MAC address:
console(config)# interface vlan 8
console(config-if)# bridge multicast address 01:00:5e:02:02:03
The following example registers the MAC address and adds ports statically.
console(config)# interface vlan 8
console(config-if)# bridge multicast address 01:00:5e:02:02:03
add ethernet g11-14
Address Table Commands
59
Advertisement
