Advertisement
LLDP Commands
Command Group
lldp enable (global)
lldp enable (interface)
lldp timer
lldp hold-multiplier
lldp reinit-delay
lldp tx-delay
lldp optional-tlv
lldp management-
address
clear lldp rx
show lldp
configuration
show lldp local
show lldp neighbors
10
Command Groups
Description
Enables Link Layer Discovery Protocol.
Enables Link Layer Discovery Protocol (LLDP) on an
interface.
Specifies how often the software sends Link Layer
Discovery Protocol (LLDP) updates.
Specifies the amount of time the receiving device should
hold a Link Layer Discovery Protocol packet before
discarding it.
Specifies the minimum time an LLDP port will wait
before reinitializing LLDP transmission.
Specifies the delay between successive LLDP frame
transmissions initiated by value/status changes in the
LLDP local systems MIB.
Specifies which optional TLVs from the basic set should
be transmitted.
Specifies the management address that would be
advertised from an interface.
Restarts the LLDP RX state machine and clears the
neighbors table.
Displays the Link Layer Discovery Protocol (LLDP)
configuration.
Displays the Link Layer Discovery Protocol (LLDP)
information that is advertised from a specific port.
Displays information about discovered neighboring
devices using Link Layer Discovery Protocol (LLDP).
Access Mode
Global
Configuration
Interface
Configuration
(Ethernet)
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Interface
Configuration
(Ethernet)
Interface
Configuration
(Ethernet)
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Advertisement
