Escape Sequence
Ctrl-shift-6 b
Ctrl-shift-6 c
Ctrl-shift-6 h
Ctrl-shift-6 o
Ctrl-shift-6 t
Ctrl-shift-6 u
Ctrl-shift-6 x
At any time during an active Telnet session, the Telnet commands can be listed by pressing the
Ctrl-shift-6 key, followed by a question mark at the system prompt: Ctrl-shift-6?
A sample of this list follows.
console> 'Ctrl-shift-6' ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command
prompt)
Several concurrent Telnet sessions can be opened and switched between them. To open a
subsequent session, the current connection needs to be suspended, by pressing the escape
sequence 'Ctrl-Shift-6' and 'x' to return to the system command prompt. Then open a new
connection with the telnet command.
290
System Management
Purpose
Break
Interrupt Process (IP)
Erase Character (EC)
Abort Output (AO)
Are You There? (AYT)
Erase Line (EL)
Suspends the Session