Advertisement
Syntax
show sessions
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
•
To list telnet users, perform the following procedure:
Open telnet session from PowerConnect 5316M to other Ethernet Switch Module (now
a
you are in the other Ethernet Switch Module syntax)
Press "Cntrl-shift-t-X"
b
Enter the command "show session". The number of sessions opened from PowerConnect
c
5316M is displayed.
Enter the command "resume [number of session]" to return to the relevant telnet
d
session.
Examples
The following table describes the significant fields shown in the display:
console> show sessions
Connection
--------
1
2
Field
Description
Connection
Connection number
Host
Remote host to which the Ethernet Switch Module is connected through a Telnet
session.
Address
IP address of the remote host.
Port
Telnet TCP port number
Byte
Number of unread bytes for the user to see on the connection.
Host
--------------
Remote device
172.16.1.2
Address
Port
--------
-----
172.16.1.1
23
172.16.1.2
23
Byte
----
89
8
System Management
295
Advertisement
