Advertisement
show bootvar
show bridge address-table
show bridge address-table
count
show bridge multicast address-
table
show bridge multicast address-
table
show bridge multicast filtering
show copper-ports cable-
length
show copper-ports tdr
show crypto key mypubkey
show crypto key pubkey-chain
ssh
show crypto certificate
mycertificate
show dot1x
show dot1x advanced
show dot1x users
show dot1x statistics
show hosts
show ip ssh
show ip interface
show lacp ethernet
show lacp port-channel
show logging
show logging file
show management access-class
32
Command Modes
Displays the active system image file that the Ethernet Switch Module
loads at startup
Displays all entries in the bridge-forwarding database.
Displays the number of addresses present in all VLANs or at specific
VLAN.
Displays all entries in the bridge-forwarding database.
Displays multicast MAC or IP address table information.
Displays the multicast filtering configuration.
Displays the estimated copper cable length attached to a port.
Displays the last TDR (Time Domain Reflectometry) tests on specified
ports.
Displays the SSH public keys stored on the Ethernet Switch Module.
Displays SSH public keys stored on the Ethernet Switch Module.
Displays the SSL certificates of the Ethernet Switch Module.
Displays 802.1X status for the Ethernet Switch Module or for the
specified interface.
Displays 802.1X enhanced features for the Ethernet Switch Module or
for the specified interface.
Displays 802.1X users for the Ethernet Switch Module.
Displays 802.1X statistics for the specified interface.
Displays the default domain name, a list of name server hosts, the static
and the cached list of host names and addresses.
Displays the SSH server configuration.
Displays the usability status of interfaces configured for IP.
Displays LACP information for Ethernet ports.
Displays LACP information for a port-channel.
Displays the state of logging and the syslog messages stored in the
internal buffer.
Displays the state of logging and the syslog messages stored in the
logging file.
Displays the active management access-list.
Advertisement
