Advertisement
RMON Commands
Command Group
show rmon statistics
rmon collection history
show rmon collection
history
show rmon history
rmon alarm
show rmon alarm-table
show rmon alarm
rmon event
show rmon events
show rmon log
rmon table-size
SNMP Commands
Command Group
snmp-server community
snmp-server view
snmp-server filter
snmp-server contact
snmp-server location
snmp-server enable traps
snmp-server trap
authentication
14
Command Groups
Description
Displays RMON Ethernet Statistics.
Enables a Remote Monitoring (RMON) MIB history
statistics group on an interface.
Displays the requested history group configuration.
Displays RMON Ethernet statistics history.
Configures alarm conditions.
Displays the alarms summary table.
Displays alarm configurations.
Configures a RMON event.
Displays the RMON event table.
Displays the RMON logging table.
Configures the maximum RMON tables sizes.
Description
Sets up the community access string to permit access
to SNMP protocol.
Sets up a system contact.
Creates or updates a filter entry.
Sets up a system contact.
Sets up the information on where the Ethernet Switch
Module is located.
Enables the Ethernet Switch Module to send SNMP
traps or SNMP notifications.
Enables the Ethernet Switch Module to send Simple
Network Management Protocol traps when
authentication failed.
Mode
User EXEC
Interface
Configuration
User EXEC
User EXEC
Global
Configuration
User EXEC
User EXEC
Global
Configuration
User EXEC
User EXEC
Global
Configuration
Access Mode
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Advertisement
