Advertisement
show bootvar
Ethernet Configuration Commands
Command Group
interface ethernet
interface range ethernet
shutdown
description
duplex
speed
negotiation
flowcontrol
mdix
back-pressure
port jumbo-frame
clear counters
set interface active
show interfaces
configuration
show interfaces status
6
Command Groups
Displays the active system image file that the
Ethernet Switch Module loads at startup.
Description
Enters the interface configuration mode to
configure an Ethernet type interface.
Enters the interface configuration mode to
configure multiple Ethernet type interfaces.
Disables interfaces.
Adds a description to an interface.
Configures the full/half duplex operation of a given
Ethernet interface when not using auto-negotiation.
Configures the speed of a given Ethernet interface
when not using auto-negotiation.
Enables auto-negotiation operation for the speed
and duplex parameters of a given interface.
Configures the Flow Control on a given interface.
Enables automatic crossover on a given interface.
Enables Back Pressure on a given interface.
Enables jumbo frames for the Ethernet Switch
Module.
Clears statistics on an interface.
Reactivates an interface that was suspended by the
system.
Displays the configuration for all interfaces.
Displays the status for all interfaces.
Privileged EXEC
Access Mode
Global
Configuration
Global
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Interface
Configuration
Global
Configuration
User EXEC
Privileged User
EXEC
User EXEC
User EXEC
Advertisement
