Paper Rubs Against The Printhead - Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual

Problems with the printing quality

Paper rubs against the Printhead

The type of paper specied in the printer driver does
not match the type loaded in the printer.
Paper has been loaded incorrectly, causing it to
wrinkle.
The Printhead is set too low in the Control Panel
menu.
You are printing on heavyweight paper or paper that
curls or wrinkles easily after absorbing ink.
When you have loaded paper, the paper you have
loaded does not match the type selected on the
Control Panel.
670 Troubleshooting
Cause Corrective Action
Load paper of the same type as you have specied
in the printer driver.
(→P.106)
(→P.136)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and
try printing again.
Reload the paper.
(→P.106)
(→P.136)
In the Control Panel menu, set Head Height to
Automatic.
(→P.611)
When printing on Heavyweight Coated Paper or
other paper-based media, choose a VacuumStrngth
setting of Strong or Strongest in the Control Panel
menu. If the paper still rubs, set Head Height to
Highest in the Control Panel menu.
(→P.621)
(→P.611)
When printing on CAD Tracing Paper or other
lm-based media, choose a VacuumStrngth setting
of Standard, Strong, or Strongest in the Control
Panel menu. If the paper still rubs, set Head Height
to Highest in the Control Panel menu.
(→P.621)
(→P.611)
When printing on paper 0.1 mm (0.004 in) thick or
less, choose a VacuumStrngth setting of Weakest
in the Control Panel menu. If the paper still rubs, set
Head Height to Highest in the Control Panel menu.
(→P.621)
(→P.611)
Be sure to select the correct type of paper in the
Control Panel menu when loading paper.
(→P.106)
(→P.136)