Canon iPF650 - imagePROGRAF Color Inkjet Printer User Manual page 72

Control Panel
GL2 Process-
Settings ing
Option
GL2 Set Print
Interface EOP Timer
Setup
TCP/IP
NetWare
AppleTalk
Ethernet
Driver
Interface Print
Return Defaults
56 Printer Parts
Setting Item
PageSizeProcess2
IPv4 IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 IP
Settings Address
Subnet
Mask
Default
G/W
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Description, Instructions
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
Choose whether the printer IP address is congured
automatically or a static IP address is entered
manually.
Specify the protocol used to congure the IP address
automatically.
Specify the printer network information when using
a static IP address.
Enter the IP address assigned to the printer, as well
as the network subnet mask and default gateway.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to
the default values.