Table of Contents
Advertisement
Zone 2 —Continued
Setting the Powered Zone 2
To use Zone 2, you must make this setting. It enables the
speakers connected to the ZONE 2 SPEAKERS termi-
nals so that they produce sound when Zone 2 is used.
1
2, 3
1
Press the [RECEIVER] button fol-
RECEIVER
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Initial
Setup," and then press [ENTER].
ENTER
The Initial Setup menu appears.
ENTER
3
Use the Up and Down [
buttons to select "3. Hardware
Setup," and then press [ENTER].
ENTER
The Hardware Setup menu appears.
ENTER
4
ENTER
2–4
1, 5
5
Note:
• This procedure can also be performed on the AV
]/[
]
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
]/[
]
Use the Up and Down [
]/[
buttons to select "a. Powered
Zone 2," and use the Left and
Right [
]/[
] buttons to select:
Menu
------------------------
Basic Setup
1.Initial Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Digital Input
1-3.Hardware Setup
------------------------
2.Component Video
Advanced Setup
3.Hardware Setup
a.Powered Zone2
3.Surround Setup
:Not Activated
4.Audio Adjust
b.Zone2 Out
5.Listening Mode Preset
:Fixed
6.Preference
Not Activated: Zone 2 SPEAKERS
terminals deactivated.
Activated: Zone 2 SPEAKERS termi-
nals activated.
When Zone 2 is activated and turned on
(see page 73), the speakers connected
to the ZONE 2 SPEAKERS terminals
output sound, but the speakers con-
nected to the SURROUND BACK
SPEAKERS terminals do not. (When
Zone 2 is activated but not used, the
surround back speakers work as nor-
mal.)
Press the [SETUP] button.
The setup menu closes.
]
71
Advertisement
Table of Contents
